UltraZone UV-C and Bo3 Corona Discharge ozone Spa Sanitiser unit.
UltraZone combines ozone and UV-C sterilisation technology.
This unit works by the ozone gas being generated then injected and mixed into the UV chamber. The UV then reacts with the ozone to create a powerful oxidiser to burn off unwanted organic matter, the result is crystal clear and clean water.
- Dimensions: Length - 350mm x Height - 160mm x Depth - 85mm
- Ozone output is 50mg/hr and requires a minimum flow of 14LPM and max of 75LPM.
- 240V 50/60Hz 140mA 32watts.
- The unit has an LED indicator:
- Green LED Signals Ozone and UV operating normally
- Flashing Yellow LED Signals UV-C Lamp needs replacement
- Red LED Signals Non-operational
To be fitted by a qualified electrician, pool or spa technician only. Spa Store will not be liable for incorrect installation, damage or injury caused by an un qualified person installing this part.
Still not sure this is the correct heater? Contact our heater Experts.