215x125mm Vortex® Spas Cam Lock Filters C30 (3 pack: 2 Pleated & 1 Purezone)

Vortex Spas™ Camlock Filter 215 x 125mm (2x Pleated + 1x Purezone) Boxed Set

This new Cam Lock filter design made changing the filter much easier and negated the issues caused by thread wear, cross threading and over tightening which can be found with previous threaded filters.

If your spa has three filters and the filter housing pictured here and the filters have the camlock fitting, then these are the correct filters.

These filters fit post-June 2016 Vortex spas and swim spas: Azure, Aquagym, Aqualap, Cerium, Cobalt, Eon, Hydrozone, Iridium, Mercury, Nitro, Palladium, Spectrum and Xenon.

NOTE: 

1. Purezone caution: Not recommended with hybrid heat pumps due to potential flow errors—swap with a standard pleated filter if necessary. 
2. Threaded-housings upgradeable: Older spas using threaded filters can switch using Camlock adapters.
3. Cam Lock filter adapters not included in box. If you have older 400 series threaded filters, you can upgrade to these filters using Vortex® Spas Cam Lock Pleated Filter Adapter.

Product Compatibility

• These filters fit post-June 2016 models from Vortex Spas™;
• Azure, Aquagym, Aqualap, Cerium, Cobalt, Eon, Hydrozone, Iridium, Mercury, Nitro, Palladium, Spectrum and Xenon.
• May also suit some other spas.
  

If your spa has three filters with the filter housing pictured here, and, the filters have the Camlock fitting then these are the correct filters.

Height: 215mm

Outside Diameter: 125mm

Top: Closed

Bottom: Cam Locked