Product Overview
Spanet SV Mini 2 Package, complete with controller, 2.0kw heater and touchpad.
SV Mini 2 230volt outputs
PUMP 1: Circ Pump, 1Spd Pump or 2Spd Pump(the pump on this outlet must be pushing water through the heater)
PUMP 2: 1spd Pump(10amp Max)
PUMP 3: 1spd Pump(10amp Max
BLOWER: Blower(4.5amp Max)
230V, this outlet has a constant 230volts and is not switchable (can be used to power a heat pump or any other item requiring a constant 230volts)
O3/UV, this outlet is only to be used with an ozone system
SV Mini low voltage outputs
1 x Touch pad outlet
1 x Light (can only fit a Spanet SV Series Light in 2.5 or 5 )
1 x Heat Pump Port
1 x Wifi Port
SV Mini Power Ratings
Input Voltage: 220-240volt 50/60hz
Rated with mains lead: 15amp max
Rated when hard wired: 25amp max
Current rating: this unit is supplied with a 15amp lead and plug but the lead can be removed and the SV Mini can be hard wired with a 25amp power supply.
SV Mini Features
*In heater temp sensor
*Max Temp 41 degrees
*Adjustable Filtration
*Sleep Timer
*Heat Pump Interface
*Wifi Interface
*Programmable Load Shedding
Dimensions
Control box: 315W x 210H x 85D mm
Power lead: 3m
Heater including unions: 310W x 135H x 100D mm
Heater Power Lead: 1.5m (heater lead is hard wired into the controller)
Heater Data Lead: 1.5m
Touch Pad Face Size: 130W x 60H x 30D mm
Touch Pad Hole Size: 110W x 40H mm
Touch Pad Lead: 2.3m
Sold individually
To be fitted by a qualified electrician, pool or spa technician only. Spa Store will not be liable for incorrect installation, damage or injury caused by an un qualified person installing this part.
Selection Tips
- Check your data label
- Check you spa type
- Check your model number
Still not sure this is the correct heater? Contact our heater Experts.
