Silver Cove Spa Pool Sanitiser 5 Litres

Initial Treatment

As water quality varies from place to place we recommend an initial three-day protocol to remove contaminants from your water before using your spa:

On Day 1 Drain, clean and refill spa pool. Add 1L Silver Cove to your spa, followed by 500 ml on Day 2 and 500 ml again on Day 3 while running the pool for a minimum of 6 hours per day) and cleaning the filters each day. The spa pool water should be clear and odourless. (In rare cases, it may be necessary to add further 100 ml increments).

The filter needs to be hosed off and left to soak in filter sanitiser /degreaser overnight on each of the 3 days.(Poolwise makes a natural, plant-based filter degreaser).

Drying off in the sun is also very beneficial.

Once a week thereafter, add 1⁄2 litre (500 ml) per 1000 litres of pool water to be sanitized.

At any sign of decreased water clarity/quality, when spa is under heavy usage, has long exposure to direct sunlight or is contaminated with suntan lotions, sunscreens, etc, a shock treatment should quickly rebalance your spa water. There are a number of oxygen-based shocks on the market.

Helpful Tips

Ongoing Maintenance

• Weekly, add 500ml (half a litre) of Silver Cove per 1,000 litres of water.
• If water clarity decreases, or the spa is heavily used, exposed to sunlight, or contaminated
  (lotions, sunscreens), increase the weekly dosage by 100ml until clarity is restored.

Environmental Safety
Silver Cove is environmentally friendly and natural, removing the need for Chlorine and Bromine.

Compatibility
Suitable for any spa pool model.

Skin Sensitivity
Colloidal Silver is known for its therapeutic effects on skin and respiratory membranes, rather than causing irritation.

Odor
Odorless and tasteless.

Maintenance Requirements
Very low—no pH adjustments needed. Water pH does not impact effectiveness.

Temperature Sensitivity
No temperature restrictions: Silver Cove works effectively across all spa temperatures.

Pump Operation
Pump does not need to run constantly; at least one hour of circulation daily is recommended, especially during and after use.

Running the filter pump for about 20 minutes after adding Silver Cove is advised.

Product Dosage & Frequency
Start with 1L of Silver Cove per 1,000 litres of water. Weekly, add 500ml per 1,000 litres.

Water Replacement
Periodically drain and clean your spa, then refill and restart the protocol for consistent water quality. Change your spa water every 8 to 12 weeks depending on usage.

Can Silver Cove be used in my spa pool?
Silver Cove can be used in any model of spa pool.

How environmentally friendly is Silver Cove?
Silver Cove is environmentally safe and natural, eliminating the need for Chlorine and Bromine.

Will Silver Cove be irritating to sensitive skin?
Colloidal Silver is widely acknowledged for its therapeutic effect on many skin problems - enhancing and normalising, rather than irritating, the condition of your skin (and respiratory membranes).

Does Silver Cove have an odour?
Silver Cove is odourless and tasteless.

How much Silver Cove is needed for my spa pool? How often do I need to add more sanitiser?
Initially add 2 litres of Salud’s Silver Cove formula for every 1000 litres of pool water. Once a week thereafter, add ½ litre (500 ml) per 1000 litres of pool water to be sanitised.

Will using Silver Cove in my spa pool require a good deal of pool maintenance?
A great advantage of Silver Cove is the easy, low maintenance usage. No need to test water or balance pH.

Do I need to keep my spa pool at a certain temperature in order for Silver Cove to work?
No. Silver Cove is not temperature sensitive so this is not a concern; however, do keep your spa pool covered when not in use.

Does my pump need to be operating in order for Silver Cove to be effective?
No. Silver Cove will save you money and energy as it does not require continual pump usage to keep water circulating.

What do I need to do in order to get optimal results when using this type of product?
Because Silver Cove and similar, natural products do not contain harsh chemical disinfectants, a more precautionary approach to controlling pool usage is advised. Common sense guidelines to maintaining healthy, high level water quality involve:
• having all pool users shower before using pool
• making sure sunscreens, tanning lotions etc do not contaminate pool water
• keeping pool covered when not in use
• cleaning off the pool filter with a high pressure hose once a week and with a de-greasing product once a month
• regularly changing pool water
• circulating water for a short period every day or two if possible

How often must I change the water in my spa pool?
As with any type of sanitiser, periodic draining, cleaning and reinitiating the product’s protocol is recommended to ensure consistent spa water quality. It is recommended to change your spa pool water every 4- 12 weeks depending on the level of usage.

What if the spa water becomes less clear?
At any sign of decreased water clarity/quality or when spa is under heavy usage or has long exposure to direct sunlight, increase weekly treatment amount by 100 ml increments until clear. If water quality is still unsatisfactory:
drain, clean, refill and reinitiate Silver Cove’s protocol, making sure filter is cleaned.

Are there any other advantages to using Silver Cove in my spa pool?
The use of Silver Cove is entirely flexible and adjustable (using less or more product) according to conditions, level and manner of spa pool usage. Silver Cove can be purchased periodically as required to suit your budget.