Generic Spa Cover 2000 x 2000mm R300mm (Charcoal)
Save on heating and keep your spa protected from the elements with cover manufactured to perfectly fit your spa pool.
A good spa cover is essential for your spa pool to protect all your components from harsh UV light from the sun. A well-made spa cover also seals tightly and provides insulation for your spa, retaining heat and making it much more efficient to keep your water warm.
Need help measuring your spa cover?
Download our helpful measurement sheet:
Top vinyl: Marine Grade top vinyl reinforce the function of Waterproof ,Anti-Mildew, Moisture proof , UV resistance, Cold cracking resistance, Abrasion resistance.
Bottom vinyl: made of pvc ,resistant to mildew, cold cracking ,abrasion, chlorine resistant P.E. plastic to eliminate bleaching.
Foam: Tapered 100% virgin resin Expanded Polystyrene(EPS) foam cores with the density of 25kg/cbm or 32kg/cbm for optimum strength and foam is vacuum sealed. The internal foams have a 90 to 60mm taper to prevent ponding on the surface of the cover.
Heat sealed vapor shield: PE 6 mil plastic or can de made of high quality aluminized paper.
Gauge Aluminum C-Channel: Lighter, extra strength and corrosion proof, ensuring structural integrity for the life of cover.
Handle: Tear-resistant reinforced nylon handles for easy opening and closing .
Strap: Eight tie-down straps with Security Childproof Locks. The spa pool cover 8 locking mechanisms are fitted to limit access to the spa.
Skirt: Perimeter skirt that helps keep heat in and Insulate dust and dirty, 110mm long.
Corrosion Proof Nylon Zipper: Large #8 zipper with protective flap will not corrode or pull apart.
The hinge: 4 layer, quadruple reinforced hinge to help this most-worked part .
The heat stopper pads: That eliminates heat loss .
The weep holes: In the bottom of the cover allow condensated water to drain.
Thread: Double stitched with high grade bonded polyester, UV resistance.
corner Radius: 300mm
Warranty: Applies for a period of 24 months for the vinyl outer and 12 months for the polystyrene inner billets. The warranty is from the date of purchase.
- Avoid excessive exposure to chemicals
- Remove cover during shock dosing, return when levels are normal again
- Only clean the cover using luke warm and mildly soapy water then rinse with fresh water
- Always lift and carry the cover when moving, never drag the cover
- During periods of high wind ensure the cover is locked or store out of the wind
- Never use chemical cleaners or solvents on the cover
- Never expose the cover to chemical cleaning solutions commonly used to wash the exterior of houses
- Be aware that chemical cleaning solutions can drift a distance. store the cover safely away during exterior house cleans
- Extend the life of the cover by using a cover lifter
Spa Cover FAQ's:
Will a spa cover reduce my spas power use?
Spa pool hard covers have a thermal resistance (R) value of 2.28 and virtually eliminate evaporation. This enables hard covers to save up to 70% of the pool heating energy requirements.
Are the Spa Store spa hardcovers safe?
Spa Store spa covers are designed to prevent a small child accessing the pool. This only works if the locking devices are used.
What sized spas can be covered with a spa hardcover?
Most spas are under 2400mm x 2400mm square and are simple to cover. Larger covers can be made but may need modifications. Email us to discuss further.
Are there any spa shapes that can't be covered?
Spa Store hard spa covers can be custom fitted to almost all spas.
- Check your data label
- Check your spa type
- Check your model number
Still not sure this is the correct part? Contact our Parts Experts.