Davey Spa Quip® Spa Power 1200 3.5KW Spa Controller and Oval Touchpad

• The SP1200 is sold in the following heater sizes= 3.5kw, 4.5kw, 6.0kw
• All Model are rated up to 40amp single phase MAX but this can be lower depending on the power draw of the items plugged into the controller.
• The 3.5kw model can also be set up with a 3phase power connection

System is sold complete with: Heater/Control Box, Oval Touchpad, In-Pool Temp Sensor and 2 X 50mm unions,

This Controller can be set up in the following configurations (Download user guide from task tab for full details)

High Voltage AMP Sockets : Pump 1A (one or two speed pump) Pump 1B (single speed pump, this socket can't be used if socket 1A has a two speed pump fitted). Pump 2A (one or two speed pump) Pump 2B (single speed pump, this socket can't be used if a two speed pump is fitted to socket 2A) AUX Output (this socket can run a blower or pump) SPVSB (this socket can only be used for a Davey Variable speed blower) Circ Pump Socket, Ozone Socket

Low Voltage Sockets inside controller: 2 X Touch pad sockets, 4 X Davey LED light sockets, 1 X in pool temp sensor socket, 1 X 12volt light Output

*NOTE: Rectangular touch pads can be ordered on request Q70069-10SP12 (good idea if retro fitting SP1000).

Controller Specifications

• Heater Wattage: 3500w
• Max Current: 40amp
• Power Lead: Hard Wired
• Power Lead Length: N/A
• Heater Unions: 50mm

Controller Dimensions

• Length: 310mm
• Height: 360mm
• Width: 95mm
• Weight: 4.2kg

Touchpad Dimensions

• Face Size –
• Length: 172mm
• Width: 91mm
• Depth: 5mm

Hole Size –

• Length: 135mm
• Width: 65mm
• Touchpad Lead Length: 3m

Sold individually