Davey Spa Quip® Spa Power 400 2.0kw(15amp) Spa Pool Controller/Heater.
Also available in a 1.5kw(10amp) model.
**THIS PRODUCT IS MADE IN AUSTRALIA**
This system is a good replacement for most Pulsar and 2095 controller (heater will fit the same plumbing as any Pulsar/2095 with a 50mm heater Tee and will fit the same touch pad cut out).
System is sold complete with: Heater/Control Box, Heater and Heater tee, Touch pad and overlay.
This Controller can be set up in the following configurations (Download user guide from task tab for full details)
1 X 2spd pump, 1 X Blower (has to be a Davey SPVSB blower NOT A STANDARD BLOWER) 1 X Ozone, 1 X LED DAVEY LIGHT, 1 X Circ Pump.
1 X Jet Pump, 1 X Blower (any type of blower) or a second jet pump, 1 X Ozone 1 X LED DAVEY LIGHT, 1 X Circ Pump.
NOTE: If a 2speed pump is fitted you have to fit a Davey Variable speed blower.
NOTE: Circ Pump outlet will run 24/7 unless a time clock is fitted.
**Optional Time clock can be purchased Q921016**
To be fitted by a qualified electrician, pool or spa technician only. Spa Store will not be liable for incorrect installation, damage or injury caused by an unqualified person installing this part.
Still not sure this is the correct controller? Email us.