Poppits Spa Sanitiser 15 litre
Contains: 150 gm/litre Hydrogen Peroxide
- Chlorine free sanitiser with Silver for Pools and Spas
- Clarifies water and kills the bacteria in spa water
- Check your pool volume
Directions for use:
Add 1 litre per 1000L of water at start up with your jets on for 20 minutes then you can use your spa.
Weekly add 500ml per 1000L for an average user - more if you are a heavy user. Average use is 1-2 people 2-3 times per week. This is a guide only.
Always check with your test strip before entering your spa, ideally your Peroxide level should be 100ppm.
Please read Poppits Sanitiser label for instructions and dose rates.
Any advice or suggestions above, including but not limited to instructions and dosing rates are intended to be a guide only.
Spa Store and its staff recommend you read the full instructions on all chemical containers.
We will not accept responsibility for the use of these products.
Spa chemicals cannot be shipped to a Post Box. Please provide a physical address during checkout.