Biologica Spa Alchemy Chlorine Free Natural Water Treatment

Dosage

100ml per 1,000 litres of water. (See below for dosage examples)
Single dose lasts up to 6 weeks under ideal conditions.

For 1,000 litres of water - 100ml
For 1,100 litres of water - 110ml
For 1,200 litres of water - 120ml
For 1,300 litres of water - 130ml
For 1,400 litres of water - 140ml
For 1,500 litres of water - 150ml etc.

Directions - Start Up Procedure

1. Clean spa filters, pipes and spa surfaces.
2. Add fresh water and test.
3. Balance water in this order: Hardness (to spa manufacturer’s requirements), total alkalinity (80 – 120ppm) then pH (7.4 – 7.6).
4. Once in balance, add Spa Alchemy™ (100ml/1,000L) and run spa jets for 20 minutes.

Directions - On Going Maintenance

1. Clean spa filters weekly.
2. Test water regularly (as per spa manufacturer’s requirements). If water is out of balance repeat Step 3.
3. Shock treat your spa water at least weekly with chlorine, bromine or peroxide based sanitisers.
4. Dose with Spa Alchemy™ (100ml/1,000L) every 4 – 6 weeks and run spa jets for 20 minutes.
5. Change water as per spa manufacturer’s requirements.

Additional tips for best results

Regularly clean the filters thoroughly with a filter cleaner and rinse well to remove any residue. You could also use some pipe and surface cleaner to clean the inside surfaces and pipes of your spa. A drain and refill after thorough cleaning will also reset your spa water chemistry and allow Spa Alchemy water treatment to do its job better. Refer to Start Up Procedure under Directions for details instructions.

CAUTION

Undiluted formula can be an irritant. Avoid eye contact. Do not drink. Do not inhale mist or vapour. Always use as directed.

First aid

Eyes: In case of contact with undiluted formula, flush with cool water for 15 minutes. If irritation persists, call a physician.

Ingestion: Drink cool water and call a physician. Do not induce vomiting.

Any advice or suggestions above, including but not limited to instructions and dosing rates are intended to be a guide only.

Spa Store and its staff recommend you read the full instructions on all chemical containers.
We will not accept responsibility for the use of these products. 

As every spa and it's usage can differ, regular testing of your spa's water balance is important.

What is Spa Alchemy water treatment and why do I need it?
Biologica’s Spa Alchemy™ water treatment is carefully designed to be the most effective, environmentally friendly and convenient spa water treatment to keep your spa water clean and clear and help keep it in balance. Best of all Spa Alchemy™ water treatment has no harmful ingredients that damage your body, your spa or the environment.

Is Spa Alchemy water treatment suitable for my spa pool?
Spa Alchemy™ water treatment can be used in any spa pool model.

How do I use Spa Alchemy water treatment in my spa?
Shake well before use. Add 100ml per 1,000 litres of water every 4 - 6 weeks and run the spa jets for 20 minutes to circulate the product. Your spa is ready to be enjoyed.

How soon after using Spa Alchemy water treatment can I start using my spa pool?
Spa Alchemy water treatment does not contain any harsh or caustic chemicals, nor does it need you to wait for days before using your spa. Just pour in the correct dose, run your circulation pump for 20 minutes and you can jump in and enjoy your spa pool. 

How often do I need to dose my spa with Spa Alchemy water treatment?
For regular use, we recommend dosing your spa every 4 weeks. For occasional use, you can dose it every 6 weeks.

Will using Spa Alchemy water treatment save me time and effort maintaining my spa pool?
Absolutely! Spa Alchemy water treatment is designed specifically for ease of use and convenience. It keeps your spa clean, clear and in balance.

Just test your water as per the spa manufacturer’s instructions and see how little you will have to do to maintain control of your spa water.

Does my pump need any additional operation for Spa Alchemy water treatment to be effective?
No, Spa Alchemy water treatment does not require any additional pump circulation to work. Follow your spa manufacturer’s instructions as usual.

Is Spa Alchemy water treatment environmentally friendly?
Yes. Spa Alchemy water treatment is biodegradable, natural and sustainable. It is also non-caustic, chlorine, phosphate and soap free.

Do I need to refill my spa before using Spa Alchemy water treatment?
Spa Alchemy water treatment will perform its magic in any clean spa. However, for best results, we recommend starting with a thorough pipe, filter and surface clean before refilling with new water. Then test and balance your water in the order set out in Step 3 of the Start Up Procedure in the Directions.