Dual Action Spa Sanitiser and Shock
Unlike Lithium sanitisers, Ozone Sanitisers or Shock reactivates Armour.
- Recommended for daily use to control bacteria and algae in outdoor spas.
- Chlorine based sanitiser with stabilized sodium bromide for long life.
- Unlike Lithium Sanitisers, weekly dosing with shock is not required.
- Not considered Dangerous Goods
- Cannot be used with Nature 2 sticks or SimpleSilver. It will damage these.
DIRECTIONS FOR USE
RESTRAINT: DO NOT use this product in indoor heated pools or commercial spa installations . THIS PRODUCT IS NOT SUITABLE FOR SUPER-CHLORINATION.
Approximate Daily Dosage: 6–10 grams per 1000 litres. This dosage rate is intended only as a guide to obtain the correct bromine residual as listed in the Required Levels table. Refer to General Instructions for more information.
1. This product contains a stabilised chlorine compound. Prior to dosing spa, it is recommended that:
(a) The filter system be backwashed and chemically cleaned.
(b) The water be tested and balanced by your BioGuard Approved Retailer.
2. As a daily sanitiser: Apply 6–10 grams of BioGuard Spa Armour per 1000 litres, adding the product directly to bather-free spa water with circulation system operating. Test for available bromine and repeat dosage at 15 minute intervals until a residual of 2.0ppm is reached in cold water, or 4.0ppm is reached in water above 26°C.
3. As an oxidiser: To destroy organic wastes, periodic oxidation of spa water is recommended immediately after heavy use, or once a week after moderate use. Apply 25 grams of Armour per 1000 litres as often as is required. Bathers should not re-enter spa until bromine residual falls below 6.0ppm.
4. Maximum spa water usage temperature is 38°C. Bather time in spas at 38°C should not exceed 15 minutes
