Product Overview
Biologica™ Natural Spa Cleaning Kit
The complete spa cleaning kit. Consists of powerful, easy to use, natural and environmentally friendly products.
Packages Includes:
- Restore™ Natural Spa Filter Cleaner 500ml
- Purge™ Natural Spa Pipe Cleaner 500ml
- Brilliant™ Natural Surface Cleaner 500ml
- Microfiber cloth for scratch-less cleaning
Safe for your family and the environment.
- 100% biodegradable for the sake of our planet
- Natural sustainable ingredients
- Made in New Zealand
Ingredients: Proprietary plant based formula, surfactants and natural scent.
Usage Information:
Directions
- Drain the spa pool - the best practice is to add Purge™ Natural Spa Pipe Cleaner 500ml and leave the spa running for 10 mins and then drain the spa pool.
- Clean all the surfaces - use Brilliant™ Natural Surface Cleaner 500ml to clean the surface of the spa. Spray the surfaces, let it sit for a few minutes, spray again and wipe away with a clean micro fibre cloth for an effortless and scratch-free finish.
- Clean the filters - Spray the filters inside and out with Restore™ Natural Spa Filter Cleaner 500ml, leave for 15 mins to loosen scum build up and then rinse well with high pressure hose or spa wand/comb. If possible, put in the sun to dry.
- Refill the spa pool with fresh water.
Storage: Store at room temperature.
CAUTION: Eye irritant. Avoid eye contact. Do not drink. Do not inhale mist or vapour.
First aid: Eyes: In case of contact, flush with cool water for 15 minutes. If irritation persists, call a physician.
Ingestion: Drink cool water and call physician. Do not induce vomiting.
Sold individually
Frequently Asked Questions (FAQ)
Q. Why do I need to clean my spas filters and why is this vitally important to spa maintenance?
A. Your spa cleans itself and all debris and waste is collected in your spas filters. Not cleaning filters correctly on a regular basis runs the risk of the filters becoming ineffective and may require their replacement earlier than expected.
Q. When should I clean my spas filters?
A. You should follow your spa manufacturer instructions on filter maintenance, however we recommend cleaning your filters weekly.
Q. How should I use Restore™ Natural Filter Cleaner to clean my filters?
A. Spray the filter with Restore™ and leave for 15 minutes to soak in (or spray liberally and soak in a bucket of water for 3-4 hours if you prefer). Rinse thoroughly using a pressured hose or spa comb.
Q. How do I know if the filters are blocked?
A. Dirty filters are unable to filter out contaminants from your spa water effectively. Visually inspect your filters by pulling them out (see your spa manufacturer's instructions). If they look dirty, discoloured, feel slimy or sticky or give off any bad odour, they need a thorough clean. Excessively dirty filters be much harder to clean and may result in reduced life of the filters.
Q. When should I replace my filters?
A. Follow your spa manufacturer instructions.
Health & Safety
Q. Is Restore™ Natural Filter Cleaner safe for my family's health and well-being?
A. Absolutely. It is 100% bio-degradable, pH neutral and non-caustic.
Q. Does Restore™ Natural Filter Cleaner produce an odour?
A. No, Restore™ Natural Filter Cleaner is odourless.
Q. Will Restore™ Natural Filter Cleaner adversely affect my hair, skin or my skin condition?
A. No. Being pH neutral and being made of 100% biodegradable ingredients even the most sensitive skin and hair are safe.
