Product Overview
SpaNet® SV Mini 2(1.5KW) Retro Kit
Upgrade your spa with the SpaNet® SV Mini 2 (1.5KW) Retro Kit. This kit brings advanced heating technology to your spa, ensuring a more efficient and enjoyable relaxation experience. With a compact design and powerful 1.5KW capability, it's a perfect addition to enhance your spa's performance. Elevate your hydrotherapy moments – invest in the SpaNet® SV Mini 2 Retro Kit today!
Comes Complete with the following:
Controller
Touchpad
1.5kw Heater Element
Variable Colour LED Light
2 x Single Speed AMP Cables
SV Mini Features:
In heater temp sensor
Max Temp 41 degrees
Programmable Load Shedding
Adjustable Filtration
Heat Pump Interface
Wifi Interface
Sleep Timer
Details & Specifications:
SV Mini 1 230volt Outputs:
PUMP 1: Circ Pump, 1Spd Pump or 2Spd Pump(the pump on this outlet must be pushing water through the heater)
AUX: 1Spd Pump or Blower
230V Outlet: Constant / not switchable (can be used to power a heat pump or any other item requiring a constant 230volts)
O3/UV: Used with ozone system only
SV Mini low voltage outputs: 1 x Touch pad outlet / 1 x Light (only Spanet SV Series Light in 2.5″ or 5″) / 1 x Heat Pump Port / 1 x Wifi Port
SV Mini Power Ratings:
Input Voltage: 220-240volt 50/60hz
Rated with mains lead: 10amp max
Rated when hard-wired: 25amp max
Current rating: Supplied with a 10amp lead &plug (lead can be removed / can be hard-wired with a 25amp power supply)
Dimensions
Control box: 315W x 210H x 85D mm
Power lead: 3m
Heater including unions: 310W x 135H x 100D mm
Heater Power Lead: 1.5m (heater lead is hard-wired into the controller)
Heater Data Lead: 1.5m
TouchPad Face Size: 130W x 60H x 30D mm
TouchPad Hole Size: 110W x 40H mm
TouchPad Lead: 2.3m
SV Mini-1 230volt outputs
PUMP 1, Circ Pump, 1Spd Pump or 2Spd Pump (the pump on this outlet must be pushing water through the heater)
AUX: 1Spd Pump or Blower
Constant 230volts: not switchable (can be used to power a heat pump or any other item requiring a constant 230volts)
O3/UV: outlet only to be used with an ozone system
SV Mini low voltage outputs:
1 x Touchpad outlet
1 x Light (can only fit a Spanet SV Series Light in 2.5″ or 5″)
1 x Heat Pump Port 1 x Wifi Port
SV Mini Power Ratings
Input Voltage: 220-240volt 50/60hz
Rated with mains lead: 10amp max
Rated when hard wired: 25amp max
Current rating: Supplied with a 10amp lead and plug but the lead can be removed and the SV Mini can be hard-wired with a 25amp power supply
Manufacturer: SpaNet®
Model: SN-SVM2-SPKG-15
Sold individually
To be fitted by a qualified electrician, pool or spa technician only. Spa Store will not be liable for incorrect installation, damage or injury caused by an un qualified person installing this part.
Selection Tips
- Check your data label
- Check you spa type
- Check your model number
Still not sure this is the correct part? Contact our Parts Experts.
