This system is a very good entry level controller, it can only run a two speed pump, ozone unit and 12volt light.
Control box dimensions are 190mm x 140mm x 65mm.
This is a generic unit with factory default settings. This unit needs to be fitted and setup by a qualified tradesman.
Incorrect installation could invalidate warranty.
Complete package can be purchased B-56300-03KIT-3KW.
NOTE: Heater is a separate unit which plugs on to the board.
Dimensions: (L) 215mm x (H) 133mm x (D) 73mm
To be fitted by a qualified electrician, pool or spa technician only. Spa Store will not be liable for incorrect installation, damage or injury caused by an un qualified person installing this part.
- Check your data label
- Check you spa type
- Check your model number
Still not sure this is the correct heater? Contact our heater Experts.