Spa Net Heat Pump SV 8.8kw SN-HP-90P
- Only works with SpaNet SV Spa Controllers
- Save up to 70% on your spa heating bill - That is AU $1,000.00's over the life of your spa.
- Reverse cycle - heating AND cooling operation. From 10 to 40 degrees
- Controlled by your spa touchpad
- Very quiet operation
Note: Spa Heat pumps work like a reverse cycle air conditioner. A spa heat pump takes the heat from the ambient air and transfers it to your spa through a heat exchanger. A spa heat pump can also reverse the cycle and cool your spa in the summer months by taking heat from your spa and putting it out into the ambient air.
Rated heating: 8800w, heating mode 10-40 degrees C
Rated cooling: 5400w, cooling mode 10-40 degrees C
Input power: 2100w, 8.75A, 230v single phase
The heat pump will operate effectively even at very low temperatures.
Plumbing Connection: 40mm / 1.5"- requires a minimum flow of 50 litres per minute.
Do not confuse with Universal SpaNet XS series which can be used with any spa.
Model: 125381 / SN-HP-90P
Dimensions: 955mm x 305mm x 550mm high, 48kg
- Check size
- Check controller type
- Check your model number